made of plastic and PP;
Fast to inflate;
Connect the air compressor with the DC 12V car cigarette lighter, then the nozzle with the valve of the tyre and it\'s ready to inflate.
Product name: 12V Portable Wheel Shaped Electric Car Tire Ball Inflator Air Compressor Pump
Material: plastic +PP
Uses: car tires, balls
Net weight: about 483g
Gross weight: about 555g
Product size: 175 X 175 X 65mm/6.89 X 6.89 X 2.56" (L X W X H)
Packing size: 180 X 180 X 80mm/7.09 X 7.09 X 3.15" (L X W X H)
1. It can not be used to inflate large and heavy vehicle tires, such as trucks, trucks and so on.
2. When using, you should start car engine in order to enhance the electric power, and not to use car electricity.
3. This machine is limited to DC 12V, 10A power. 110V home power is prohibited, and if you want to use home power, you must use a transformer.
4. It is only for inflating car tires. Take a rest every 15 minutes after the body cools down after use, which can extend the life of the motor. When it is fully inflated, it can last for half an hour.
5. In about 5-8 minutes, 220Kpa normal tire is ready to go. Large tires will take longer. If the pointer rapidly rise in about two or three seconds to 490Kpa, it means the air inflation is blocked and the air does not enter the tire. Then you should immediately turn off the power, pull off the gas
nozzle, otherwise the instrument and the motor will be damaged.
6. When in use, you should pay attention to tire pressure at any time. The tire pressure can not exceed its factory standard pressure.
7. The machine should avoid dampness, heavy fall and sediment invasion.
8. Children is prohibited to use.